Infinite® F50 How To
      Back to home
      1. Tecan Knowledge Portal
      2. Microplate Reader
      3. Infinite® F50 How To

      How to Install your Infinite® F50 and Magellan™ software.

      A step-by-step guide on how to install your Infinite® F50 microplate reader and first operating steps with Magellan™ software.

      1. Initial situation

      You received a new Infinite® F50 microplate reader with Magellan™ software and you don’t know how to connect the instrument and install and register the software.

       

      2. First aid

      In this step-by-step video tutorial, you will learn how to set up your Infinite® F50 microplate reader and install the Magellan™ software. The video tutorial covers the following steps:

      1. Unboxing
      2. Hardware and software installation
      3. Registering Magellan™ software
      4. First operating steps with the instrument using Magellan™ software

       

      3. Additional information

      More information on the installation process and how to define measurement parameters in the Magellan™ software can be found in the ‘Instructions for use’ section on the USB flash drive that is delivered with the instrument.

       

      4. Further help

      For further help during or after the installation process, please refer to our Helpdesk.

      Infinite® F50 How To

      Magellan™ How To

       

      Link to Tecan Product Page:

      Infinite® F50 Plus und Infinite F50 Robotic

       

      401819-005