Tecan Knowledge Portal

Back to home

Tecan Knowledge Portal

Liquid Handling

Liquid Handling

Find help for:
Fluent^® / Freedom EVO^® / EVOlyzer^® / D300e Digital Dispenser/ ...

Fluent® - How To...

How to integrate non-grid-based devices in FluentControl™

How to use the Snapshot tool in FluentControl™

How to request a FluentControl™ license online or offline

How to create labware in storage carriers (hotels, carousel, stacker) and tube runners

Performing Method Recovery after an aborted run

How to use the Export/Import tool in FluentControl™

How to apply the instrument configuration from a real instrument to the 3D Simulator of a separate computer

How to restore the database to a previous version

How to create a stacked labware on the worktable and save it as a template

How to activate and add new users using Tecan User Management in FluentControl™

What is an Inline Filter and how to replace it

How to use FluentControl™ Fast Simulation mode

How to align the Robotic Gripper Arm™ fingers on a Fluent®

How to enable the inline filter after its replacement

How to teach multiple compartments for pipetting with different arms

How to use worklist in FluentControl™

See more

Fluent® - Troubleshooting

Troubleshooting Liquid level detection errors

Troubleshooting a misaligned Flexible Channel Arm (FCA)

Calculation of an available and dead volume in FluentControl™

Troubleshooting drivers connected via DriverFramwork on FluentControl™

Fluent® - Tips & Tricks

Using the Daily System Care Method

Operating the FluentControl™ PathFinder™

Which information and files are required for a first assessment of an issue with FluentControl™?

DOs and DONTs when working with System Liquid

Different dispense modes in FluentControl™ Liquid Classes

FluentControl™ MicroScript programing

Carriers in FluentControl™

Compatibility of antivirus program with FluentControl™

How does cLLD work and what are the changes with introducing a new Multisense™ AirFCA

What is a Module and its difference to a script?

What is Sample Tracking?

What is the difference between "Reagent Distribution" and "Sample Transfer" smart commands?

FluentControl™ software compatibility with Windows® operation system

See more

Freedom EVO® - How To...

Using Daily Maintenance on Freedom EVOware®

How to use the Zip&Send tool for EVOware®

How to activate the MCS logging for EVOware®

How to use the AuditArch tool for EVOware®

How to use the Export/Import tool for EVOware®

How to troubleshoot barcode ‘’no read’’ on PosID?

How to setup Freedom EVOsim™ for application development?

How to create a backup for the Freedom EVO®

How to create and modify user roles in Freedom EVOware

How to teach the Z-Values in Freedom EVOware

How to use a Worklist on Freedom EVOware

See more

Freedom EVO® - Troubleshooting

During startup, EVOware® displays a warning message about the virtual store

No connection to the instrument during start-up or instrument connection is lost during a run

Freedom EVOware® FACTS.System – unspecified error

Troubleshooting Pressure Monitored Pipetting (PMP) errors

Troubleshooting the Unsuccessful “Self Diagnostic Test “

Troubleshooting pipetting viscous liquids

Troubleshooting for ‘’No Liquid Detected” or “Not Enough Liquid Detected”

See more

Freedom EVO® - Tips & Tricks

Compatibility of virus scanners

Freedom EVOware® software compatibility with Windows® operation system

DriverFramework (DFW) Overview

Fixed and Disposable tip materials on an Freedom EVO®

Sample Tracking on Freedom EVOware

Liquid Detection Modes in Freedom EVO

See more

Freedom EVOlyzer® - How To...

How to use the Collect and Zip tool for EVOlution™

Freedom EVOlyzer® - Troubleshooting

EVOlution™ displays an error message in the scan report after scanning barcodes

EVOlution™ displays the liquid level detection (LLD) error: No liquid detected

EVOlution™ displays the liquid level detection (LLD) error: Clot detected

Freedom EVOlyzer® - Tips & Tricks

Compatibility of virus scanners

EVO Logic™ - How To...

How to activate barcode types in EVO Logic™

How to activate the User management (USM) in EVO Logic™

How to change the location of the next available DiTi in EVO Logic™

How to set the next preventive maintenance (PM) date in EVO Logic™

How to activate the generation of different output files, and find where they are stored in EVO Logic™

See more

EVO Logic™ - Troubleshooting

EVO Logic™ displays an error message or aborts a run after scanning of carrier flags

EVO Logic™ - Tips & Tricks

Can I use EVO Logic™ and EVOware® or the instrument software (S&S*) on the same computer?

D300e Digital Dispenser - Tips & Tricks

Which buffers can I use to dispense my compounds with the D300e Digital Dispenser?

Can I use a different surfactant (or surfactant concentration)?

Can I dispense a sample dissolved in glycerol?

What are the concentration limits?

Which biomolecules can I dispense?

How many plates can I dispense at the same time?

What is the maximum volume that I can load into one Dispensehead of the cassette?

D300e does not dispense correctly: what to do

See more

D300e Digital Dispenser - How To...

Where can I download the software for the D300e Digital Dispenser?

Uno Single Cell Dispenser™ - How to...

Where can I download the software for the Uno Single Cell Dispenser?

Uno Single Cell Dispenser™ - Tips & Tricks

Which buffers can I use to dispense my compounds with the Uno Singe Cell Dispenser?

How should I prepare the cell suspension for single-cell dispensing?

Which samples and molecules can I dispense?

What are the concentration limits?

Resolvex® Prep - How To

Where can I download the latest software for Resolvex® Prep Workstation?