Tecan Knowledge Portal

Back to home

Tecan Knowledge Portal

Microplate Reader

Microplate Reader

Find help for:
Spark^® / Spark^® Cyto / Infinite® / Sunrise™ / ...

Infinite® F50 How To

How to Install your Infinite® F50 and Magellan™ software.

Filter replacement and installation

Infinite® F50 Trouble Shooting

Lid Open Error

Infinite® 200 Pro How To

How to work with the Te-Inject™ for the Infinite® 200 PRO series

How to install your Infinite® 200 PRO and i-control™ software.

How to define filter slides in i-control™

What does an overflow or an “OVER” result mean?

How to remove the transport locks

How to create plate definitions in i-control™

How to find log files with Infinite® 200 PRO

i-control™ doesn't connect to reader

How to change the filters of the F200 PRO, including FP filters

See more

Infinite® 200Pro Tips & Tricks

NanoQuant: Average blanking vs. individual blanking

Selecting the right gain for a measurement

Infinite® 200Pro Troubleshooting

Blanks and samples show similar RFU values in fluorescence intensity measurements

ERR044 General information

ERR038:Instrument Initialization Error

ERR044: X-Trans at module MTP lost steps

ERR030: Prepare: ReferencChannel

ERR031: TIMEOUT at module

ERR011 Lid open !

Number must be either non-negative and less than or equal to Int32.MaxValue or -1. Parameter name timeout

See more

Sunrise™ How To

How to install your new Sunrise™ and Magellan™ software

How to find Sunrise™ log files

How to replace a filter

Sunrise™ Troubleshooting

ERROR_0403 No Filter carriage 0403 detected

ERROR_0206 Plate transport Steploss

ERROR_0209 Lamp High Error

ERROR_020A Lamp Low Error

Spark® How To

How to work with the injector module for the Spark® multimode reader

Spark®: Specifications for gas used in the Gas Control Module

How to remove the transport locks

How to find Spark® Log files

How to import and export SparkControl™ methods

How to create plate definitions

How to define filter slides in SparkControl™

How to change the filters of the Spark® reader

See more

Spark® Tips & Tricks

Selecting the right plate for a measurement

Spark® Troubleshooting

An error appears when opening the Nucleic Acid Quantification App

Magellan™ How To

How to define a quantitative measurement with Magellan™ software

Upgrade procedure from old to new version of Magellan™/Magellan Pro™

How to register Magellan™/Magellan Pro™

Where do I find my SUID/HUID/license number in Magellan™/Magellan Pro™?

How to set different directories where Magellan™/Magellan Pro™ data (mth, wsp) is saved

See more

Magellan™ Tips & Tricks

How to convert “OVER” results into numerical values in Magellan™/Magellan Pro™

How to use the Magellan™/Magellan Pro™ Plate Geometry Editor

The meaning of < Min and > Max

Magellan™ Troubleshooting

Magellan™/Magellan Pro™ Simulation Mode

Magellan™/Magellan Pro™ does not connect to the Sunrise™ reader

Warning message: Standard curve not monotone

What to send in case of problems

MultiCheck™ How To

How to update the Normfile for MultiCheck™ Plus after calibration