- Tecan Knowledge Portal
- Microplate Reader
- Sunrise™ Troubleshooting
-
Liquid Handling
- Fluent® - How To...
- Fluent® - Troubleshooting
- Fluent® - Tips & Tricks
- Freedom EVO® - How To...
- Freedom EVO® - Troubleshooting
- Freedom EVO® - Tips & Tricks
- Freedom EVOlyzer® - How To...
- Freedom EVOlyzer® - Troubleshooting
- Freedom EVOlyzer® - Tips & Tricks
- EVO Logic™ - How To...
- EVO Logic™ - Troubleshooting
- EVO Logic™ - Tips & Tricks
- D300e Digital Dispenser - Tips & Tricks
- D300e Digital Dispenser - How To...
- Uno Single Cell Dispenser™ - How to...
- Uno Single Cell Dispenser™ - Tips & Tricks
- Resolvex® Prep - How To
-
Microplate Reader
- Infinite® F50 How To
- Infinite® F50 Trouble Shooting
- Infinite® 200 Pro How To
- Infinite® 200Pro Tips & Tricks
- Infinite® 200Pro Troubleshooting
- Sunrise™ How To
- Sunrise™ Troubleshooting
- Spark® How To
- Spark® Tips & Tricks
- Spark® Troubleshooting
- Magellan™ How To
- Magellan™ Tips & Tricks
- Magellan™ Troubleshooting
- MultiCheck™ How To
- Applications and Settings
-
Microplate Washer
-
Digital Solutions
-
General Information
-
Manuals
ERROR_0209 Lamp High Error
This issue requires a parts replacement via a service intervention
1. Usual root causes
The appearance of this error indicates a problem with the lamp.
2. First aid
• Switch off the instrument.
• Switch the instrument on again and check if this resolves the issue.
3. Typical solution
If restarting the instrument does not resolve the error, defective hardware needs to be replaced via a service intervention.
4. Further recommendations
Create a service request and contact Tecan® to schedule an onsite intervention or to send the instrument for in-house repair.
5. Next steps
• Note your instrument serial number.
• Create a service request and include the serial number.
Further Help
Link to Tecan Product Page:
401818-004