How to install your Infinite® 200 PRO and i-control™ software.

A step-by-step guide on how to install your Infinite® 200 PRO microplate reader and first operating steps with i-control™ software

1. Initial situation

You received a new Infinite® 200 PRO microplate reader with i-control™ software and you don’t know how to connect the instrument and install the software.


2. First aid

In this step-by-step video tutorial, you will learn how to set up your Infinite® 200 PRO microplate reader and install i-control™ software. The video tutorial covers the following steps:

  1. Unboxing
  2. Hardware installation of the Infinite®200 PRO
  3. Installation of i-control™ software
  4. First operating steps with the instrument using the i-control™ software


3. Additional information

More information on the installation process and how to define measurement parameters in i-control™ can be found in the ‘Instructions for use’ section on the USB flash drive that is delivered with the instrument.


4. Further Help

For further help during or after the installation process, please refer to our Helpdesk.

Infinite® 200 Pro How To

How to work with the Te-Inject™ for the Infinite® 200 PRO series


Link to Tecan Product Page:

Infinite® 200 PRO