How to install your new Sunrise™ and Magellan™ software

A step-by-step guide on how to install your Sunrise™ microplate reader and first operating steps with Magellan™ software.

    1. Initial situation

    You received a new Sunrise™ with Magellan™ software and you don’t know how to connect the instrument and install and register the software.


    2. First aid

    In this step-by-step video tutorial, you will learn how to set up your Sunrise™ microplate reader and install the Magellan™ software. The video tutorial covers the following steps:

    1. Unboxing
    2. Hardware and software installation
    3. Insert the filter slide
    4. Registering Magellan™ software
    5. First operating steps with the instrument using Magellan™ software


    3. Additional information

    More information on the installation process and how to define measurement parameters in the Magellan™ software can be found in the ‘Instructions for use’ section on the USB flash drive that is delivered with the instrument.


    4. Further Help

    For further help during or after the installation process, please refer to our Helpdesk.

    Sunrise™ How To

    How to define a quantitative measurement with Magellan™ software

    Magellan™/Magellan Pro™ does not connect to the Sunrise™ reader


    Link to Tecan Product Page: